Cannot install drivers for MTX65xx on Windows 10 64 bit for Telekom Puls Tablet

The normal tablets name is "Telekom Puls" and is from a German ISP. When I turn Developer Mode and Debug Mode on, it identifies itself as "MT65XX Android Phone" in the Windows 10 Device Manager.

Hardware ID:

Code:

---

    USB\VID_1BBB&PID_201D&REV_????&MI_01
    USB\VID_1BBB&PID_201D&MI_01

---

Compatible ID:

Code:

---

    USB\Class_ff&SubClass_42&Prot_01
    USB\Class_ff&SubClass_42
    USB\Class_ff

---

Device Instance Path:

Code:

---

    USB\VID_1BBB&PID_201D&MI_01&3A3241C5&0&0001

---

I was looking at different websites on how to make universal adb drivers, but it won't work, Windows 10 64 bit is complaining then that the .inf file has been tampered with and refuses to install it.

I looked into multiple similar posts (also here on XDA), but none of them was conclusive. Does anyone have pointers or advice on how to make this thing work?

Also tried the ADBDriverInstaller by Koush, it says incompatible with Windows 64 bit when I try to download the driver.
I also tried various other prebuilt drivers from around the net, but none helped.

Is there any way to get this Tablet installed so I can start making apps?
I would appreciate any help.

ps.: I hope this is the right place, I am new to these forums but I read a lot here and you guys rock. Neither Reddit nor Stack Exchange could help me, so here is my hope for you guys :).

pps: Can't include links to the stuff I tried :(

g3 d850 unlocked cannot detect 3g, hsdpa or 4g lte.

hello! i have g3 d850 at&t and its unlocked but i have problems while i try to connect phone with 3g or 4g lte data, signal bar ddisappears when i force connect with wcdma or lte. gsm work well. apn is ok. o g2 i have 3g 4g lte ok, with same apn and same parameters but on g3 i can connect only with 2g or E. please help me!

Notification sounds cannot be unlinked from ringtone

So, the OnePlus One has amazing speakers, the best speakers I've had on a phone so far, but unfortunately, the speakers are so loud that the notifications start disturbing the people around me, so I have to turn them down, but that does not work, because I cannot unlink the volume of the notifications from the ringtone volume, so I am FORCED to have the ringtone volume down, so the notifications do not annoy the people around me.... and I DO get a lot of notifications.

I tried everything, but although the settings show that the ringtone volume and notifications volume are unlinked, it still doesn't work.

Someone please help me, I'm tired of having to keep my ringtone volume down just for this...

OnePlus One, stock ROM, 5.1.1 / Cyanogen OS version 12.1-YOG4PAS1N0

Stuck on setupwizard and I cannot press Next button

My phone stuck on setupwizard after I wiped data/factory reset. The Next button is gray and doesn't work. Does anyone can solve this? Thanks in advance:)

Can't install MTP driver on Win 7 with encription policy (This device cannot start )

I am having problems having my Windows 7 laptop recognise my S6 Edge+ thru MTP.
All the other drivers have installed succesfully and i can even falsh using ODIN, but I ams till having problems with MTP for file transfer.
I have tried any possible solution, with no avail.

Could it be that it's due to the fact that the hard disk is encropted with BitLocker? I do have admin rights but encription is forced thru group policies. As a matter of fact, each time I attach a USB key, I am forced to ecript it in order to write anything on it. Maybe this stops MTP drivers from being installed correctly? If I go into the driver's properties I get

"This device cannot start. (Code 10)"

Thanks

Link2SD Error: cannot mount SD card partition: with Night Owl CM12.1 on GT N-7000

I am using Night Owl([ROM][CM12.1][Lollipop][Android 5.1.1] NightOwl 20151003) on samsung galaxy Note GT N-7000.

I have partitioned my external SD card (16GB Class10) with AParted (11GB Fat32, 4GB ext2, 512MB Swap).
I was able to use this partition as my internal memory to install apps.
but after flashing this rom I am not able to mount the sencond partition.

Link2SD shows SD card 2nd part not found in the storage info.
When I try to recreate the mount script I get an error

Mount script error
Mount script can not be created
Mount: Invalid argument

Please suggest a way forward.

install wrong firmware st18i in xperia active now phone cannot switch on, someonehelp

i have install wrong firmware in xperia active (supposed st17i) but i install st18i
how to reflash without debugging mode while the phone cannot switch on???:crying::crying:

LeTv x800 cannot root the device, please help!

So my LeTV Le One Pro x800 just arrived today, and I wanted to root it, checked google and the xda thread but google only tells me to use kingroot or kingo root which dont work after several attempts, and the XDA thread has some weird chinese download site from which I cannot download. Please help!

cannot connect to laptop as usb device

usually when i connect my s4 to my macbook it would immediately display a 'connected as a usb device' notification and my macbook would detect it straight away. but recently this doesnt happen anymore even with a different macbook and different usb cables. i've already enabled the usb debugging option in the developer options setting but nothing still works, please help! Thanks a lot!:):):):)

Cloudy 3.3 Cannot access storage from computer

Hey guys,
I just installed CloudyG2 yesterday. No problems. Today I try to set up Xposed and fiddle around with that (EDIT: To clarify, I did not actually install Xposed.) but I can't get the phone to be recognized by the PC. The only thing that shows up on the phone is the charging slowly message.

• LG drivers are installed and up to date


• The cable is most definitely a data cable


• I have changed the PC connection setting on the phone to MTP


• I have tried two different computers and all their USB ports

I searched and searched but I can't find any solutions outside of what I already checked above.
LG G2 VS980
CloudyG2 3.3
Any thoughts on what I might try next? I'd love to avoid a full wipe and reinstall if at all possible as the only computer I have access to is my work computer and I am off for two days.
Thanks in advance.