androidhelpz: atamp;t

Showing posts with label atamp;t. Show all posts

Monday, 12 October 2015

Need root for at&t note edge sm-n915a

I'm looking for some help rooting my N910A, can anyone help? Im still on Android 5.0.1.

Sent from my SAMSUNG-SM-N915A using XDA Free mobile app

Just switched from AT&T to Cricket

As the title states I just switched, I have run into a problem though.. I tether my phone to my computer through wifi hot spot but since I switched carriers whenever I try to hot spot now it tells me to contact AT&T to set up?? Any way to get around this?? I'm on stock4.4.2

Sunday, 11 October 2015

Need help disabling MLT through accessing LG Hidden menu through dialpad (AT&T H950)

Hi, I need some help reaching the LG hidden menu on my stock 5.1.1 AT&T G Flex2 (H950) in order to disable the battery-draining MLT service. I've read through all of the related threads to this issue, trying the combinations below.

277634#*#
3845#*950#

Some of the threads have recommended using a shortcut creation app such as QuickShortcutMaker, Secure Settings, and Shortcut Master, which I have all tried but all seem to require rooting to access the hidden menu. I would have no problem paying the for the Shortcut Master pro, but I have no guarantee that it will allow me to launch the hidden menu shortcut. I doubt that it will, as other apps that allowed me to create homescreen shortcuts have failed to open it.

I have triedLauncherPro to create a hidden menu shortcut to the homescreen, but still have not had success in opening it.

Has anyone found an alternate code for the dialpad to access the hidden menu without root or custom PR rom? This is on AT&T 5.1.1 that I received OTA through gophone. If anyone could help me out regarding this issue, I would greatly appreciate it.

AT&T H950 update and recovery problems

It's an H950 from the 0 ebay deal. I am on ATT service and the phone worked fine at H95010d

I contacted ATT customer service and had them pushed OTA software update to me. The first agent pushed H95011x to me, and things went wrong since then.

The phone cannot read the sim card (but no missing sim notice), baseband shown as unknown, if I press the "status" under the "about phone" page, the screen will flash black then go back to the about phone page.

Then I tried a factory reset. The phone started normal as if everything was fine, it just works on the first boot after the reset. But once I restart the phone, it went back to the same situation as above. I tried many times and the whole process is highly repeatable.

After that, I contacted ATT again, had the H95011z pushed to me, and it did not change the problem. Replacing sim card does not help, either.

Then I tried to get to those recovery methods on the forum, including installing the LGE mobile device drivers. But then under download mode, the phone (LGE Android MTP device) is shown as "this device cannot start (code 10)". Thus I was not able to perform fix with the tools.

I am kinds of stuck in the middle. Any help and/or suggestions would be appreciated. Thanks!

Unlocked 900A from At&t to metro pcs / T-mobile successful But can I root/rom it?

Hello if anyone could point me in the right direction, it would be appreciated.
Basically I unlocked an At&t s5 900a to Metro pcs yesterday, everything seems like it's working but the phone is still on the 4.4.4 stock At&t rom, can I root / put a different rom on it being that it's originally from the At&t network / phone? If so, would I need to put a metro pcs rom on it or at&t rom? I really just want to de-bloat the at&t apps and have it rooted so i can tether it. Anyone have any insight on this?

help with getting at&t lg g3 back to factory settings

Before I'm blasted please read this and I'll try explain as best as possible why I am asking for help with a thread that already has been discussed. I rooted my phone and flashed the paranoid ROM and gapps. The link under the paranoid thread was no longer available so I found and downloaded the latest gapps and copied both the ROM and gapps zip to my SD card and then flashed the ROM and then the gapps as directed. Apparently the gapps didn't flash and in rebooted the phone and I'm sure you know what happens when this is done. I have a phone that works but I have no gapps. No SuperSU and no other apps for that matter. I've tried numerois methods to be able to get back into recovery (twrp) to restore my backed up files to no avail. Ive tried getting into download mode, no success, booting into recovery, no success, I've tried to unroot using flashtool DLL and tot but get the error message that lg USB port is blocked when I tried to install the flashtool. I was told to try using flashify which downloaded and installed it but got the message that I don't have root access and no SuperSU privileges and I can't get into recovery that way. Then I downloaded the SDK studio to try and get a cmd prompt but that studio is so big I don't know where to go to open command prompt. All I want to do now is wipe everything off of the phone and go back to the original factory settings. Is my phone a total loss or is there a waynout therlgdlashtool do that? I understand that I may have to find out why I'm getting that message when I try using lgflash tool. Once again, thank you for any input (even a little bashing!) and direction u can give me.

Bootloop after AT&T Boot Animation

I followed the guide here by @thisisapoorusernamechoice but when my phone boots it shows the S4A boot logo then the AT&T boot animation and then it vibrates and the screen dims slightly as if android is going to finally boot and then it just resets and shows the S4A boot logo then the AT&T boot animation and just repeats this process. Any help?

Saturday, 10 October 2015

Looks like Motorola DID write the updates, but it's AT&T and VZW holding them back

http://www.wi-fi.org/product-finder-...,XT1097,XT1095

The updates went to the WiFi Alliance for certification. Maybe AT&T and VZW will stop dragging their feet and let us have it.

AT&T D950 confusion..

First. yep I'm trying to learn what I am doing lol I have only messed with a HTC Sensation a couple years ago. Now with A AT&T Flex D950, from what I read is the Flex1. mine is Ver 4.4.2, Kernel 3.4.0, Build KOT49I.D95020g.. What I have done is fire AT&T, unlocked sim, went back to T-Mobile, and rooted.. I have no LTE but all else seems to be fine.

I started looking in to fixing the LTE issue, de-bloat, see if I can get the other T-Mo functions to work like WIFI calling and so forth, maybe do more. Needs to be good for my daily device.

The more I have read, the more I am confusing myself about what I can get away with. Like what works across flex models, radio drivers that work with what I need and so forth. Need some advice/help to get me on the right track. I would like to stick with my flex so any help would be greatly appreciated.. :o
Please keep in mind I am learning as I go here:eek:

Planning to switch Carriers, Verizon or AT&T.

I am planing to switch carriers from Sprint to At&T or Verizon. I have three lines, big data user (~14-17Gb). I currently have unlimited data with sprint, but their data coverage is limited for me. I preordered the N6SP and wanted a know the communities opinion between the two. I know that my data will be limited and will be mindful.

Congratulations to at&t for releasing the new lollipop 5.1.1 update for the note 4 &

ON OCTOBER 9TH 2015, AT&T RELEASED THE LATEST LOLLIPOP 5.1.1 UPDATE FOR THE NOTE 4 (N910A) & THE NOTE EDGE (N915A). THANK YOU AT&T.
GO GET YOURS & TELL US WHAT YOU THINK OF IT :)

Sent from my SAMSUNG-SM-N915A using XDA Free mobile app

Htc at&t m8 crash

Hi,I tried upgrading my M8 from 4.16 to 4.28 manually through windows but process hanged after 28%.When i unplugged and reboot my phone will only show android system recovery screen.i have sdk toolkit downloaded in my laptop and ruu 4.28 at&t file too.please help.

androidhelpz